Date : 5/25/2003
Well this weekend I took the car apart! As you can see the whole suspension/steering system is removed as well as both fenders, both bumpers, lower valance, and the grill. I am going to have the whole suspension and the inner fender wells powder coated a gloss black so I had to remove everything. I will also be grinding all metal shown down to bare metal, priming it, and painting it an under hood black or chassis black color. Once I get all the piece back from the powder coater I will assemble it all with new Energy Suspension Poly Control Arm and Body Bushings, as well as a new set of Eibach Coil Springs and a Hellwig 1 1/8" Sway Bar. Tie Rods are in good condition but the Pitman Arm might need to be replaced. Also installing all new upper and lower ball joints, brake hoses, and wheel bearings. The spindle and brake shield will be powder coated gloss black, and the calipers will be painted a high heat black.